-
26R HUB & WHEEL NOTES
HUBS: INSTALLATION LEFT HAND (NON STANDARD) THREAD ON LEFT SIDE OF CAR. RIGHT HAND (STANDARD) THREAD ON RIGHT SIDE OF CAR. WHEELS: CLEAN PAINT OFF REAR FACE AND TAPER UNDER WHEEL SPINNERS BEFORE FITTING. SPINNERS: USE A LEAD OR SIMILAR HAMMER AND ENSURE REALLY TIGHT RECHECK AFTER 1ST 100 METRES. WHEEL SPACERS: DONORS ONLY SO…
-
26R S2 Rear Hubshaft & Drive Train Notes
[vc_row][vc_column][vc_column_text]1 ) fit 1st radius tapered spacer to hubshaft 2 ) press bearing on to hubshaft 3 ) warm up mag casting to swell approx 125 degrees c ( spit on it and it should boil your spit ! ) 4 ) slide centre bearing spacer into mag casting ready to accept shaft 5 )…
